Overall responsibilities and duties:
_ The role of a Program Quality Leader is the program core team member acting as interface towards the Customer Project Quality and represent Program internally Customers voice, to enusre on time delivery of PQL related PMS work packages and key deliverables of program phases, Lead functionally all Program related Quality resources (Prototype Quality, Advanced Supplier Quality, New Program Quality,...) to assure a consistent and aligned quality objective deployment & progress tracking process
项目质量主管作为项目核心成员，主要的职责有：客户项目质量的接口，并在内部代表项目客户的声音，确保项目在各个阶段质量相关的各种关键交付物准时完成并提交，主导所有项目相关的质量控制（样件质量，前期供应商质量，新项目质量…）,确保质量目标的展开以及进程的跟踪

The main missions of the role are:
o Lead the Program dedicated Quality team functionally and be the consolidating interface (like a Plant Quality Manager leads his plant quality team)主导所有项目阶段的质量工作，在职能上领导所有的质量团队并作为和客户的接口（像工厂质量经理领导工厂的质量团队一样）
o Achieve the Quality objectives defined within the Quality Target Study (such as the PPM, NRFT, S/R 100%,… ), cascade them to the internal suppliers (via ASQ organization) and follow them by the related Target Convergence Plan until GR#4 达成项目质量目标（例如PPM,NRFT,S/R 100%等），管理内部供应商的质量，跟踪行动计划以及完成问题收敛直到GR#4
o Be the customer quality contact and satisfy related information demands (Customer APQP tracking, Audit support, 8D communication until SOP).成为客户质量联系人，客户关怀以及满意度达成（客户APQP跟踪、审核支持、8D沟通直至SOP）。
o Execute the PMS related Program Quality work packages on time (OTD) and report the progress by indicators defined by the Program Quality Management.按时执行PMS相关的项目质量工作包（OTD），项目质量管理层定义的指标定期汇报进展情况。
o Assure deliveries within specification while leading the preparation of efficient Control Plans (CP) for 确保交付满足要求以及规范，主导控制计划的有效执行
o prototypes: CP elaboration together with Program Development Leader / System Architect) 样件：和设计工程师以及样件团队一起制定样件的CP
o pre-series: CP prepared together with Program Manufacturing Leader (PML) & Plant New Program Quality (NPQ)试生产阶段: 和项目制造主管以及工厂新项目质量工程师一起制定试生产控制计划
o Validate updates of Control Plans in pre-serial phase established by the NPQ (support PML) and obtain the approval of the Program Manager / Plant Manager prior to the Program related Milestones (GR#2a for Prototype CP, GR#2b for Pre-Series CP, GR#4 for Series CP)在试生产阶段生产阶段和新项目质量工程师一起验证控制计划的执行并在项目各个关键节点之前得到项目经理以及工厂经理的批准（GR#2a：样件控制计划, GR#2b ：试生产控制计划, GR#4：生产控制计划）
o Involve the PQM & QP in case of identified needs to change Generic Control Plans邀请项目质量经理以及质量质量团队一起验证以及更新通用的控制计划模板
o Support the program during Product development (D-FMEA contribution / KPC observation = PIST during prototype phase (further monitoring of PIST/PIPC with NPQ)在产品开发阶段支持项目的DFMEA/KPC等的制定，和新项目质量工程一起跟踪和监控关键特性控制的执行状况
o Support the program during Process development (P-FMEA contribution & analysis / Inspection equipment definition / Program QRCI / …).在工艺开发阶段支持项目的PFMEA以及检验项目的制定，项目QRCI等的支持…
o Monitor the APQP process of internal suppliers until Gate Review #2a and support the NPQ further on in his mission to achieve the Full Approval Status for all internal supplier parts before Customer PPAP (until GR#3)监控以及管理内部供应商的APQP流程直到GR#2a阶段，在客户PPAP全批签署之前完成所有内部供应商的PPAP全批（GR#3）
o The PQL coordinate the PPAP presentation between the plants and assure the "Full Approval Status" until GR#4 ( for the mechanism)主导PPAP文件的编制并确保在GR#4之前得到客户户PPAP的全批
o Apply the authority to stop any process or product delivery in case of serious non conformances (customer expectations or safety and regulations issues….) together with the responsible Quality Manager. If necessary, drive the launch of an official Alert in the Alert Management System 项目重大质量问题的管理（客户特殊特性，安全，法规等问题），和负责的质量经理一起申请停止发运，问题调查解决。如有必要，需要在报警管理系统中启动正式的报警
o Assure, that all product related requirements (KPC’s, perceived quality aspects,...) are under control (lead the preparation of efficient Control Plans) at any production stage确保在所有的项目阶段，所有的关键特性，感官质量等要求处于受控状态
o Assure, that the series-production process can be assessed as 100% secured (validate the equipment concept during P-FMEA & Control Plan activities and monitor the progress on the related action plan)确保所有量产过程100%安全，所有在PFMEA以及CP中定义的项目处于监控状态，并跟踪所有的行动计划
o Conduct regular risk assessments (e.g. by Share)对所有其他工厂以及研发等发现的问题经验教训等，对现有产品进行定期的风险评估
o Define program gauge & Create gauge technical pan &Check and accept gauge定义项目的检具，制定检具技术规范，完成检具验收以及现场使用确认
Qualifications
The ideal candidate will have/be:
Minimum education level: Bachelor Degree or above, Professional English
Experience :
o At least 3 years practical experiences in quality management function , preferably in foreign enterprise or joint venture in a manufacturing environment.至少3年有关质量管理的工作经验，***是在外企或合资企业的生产环境下
o Above 5 years experience in automotive industry or, at least in mechanical industry;5年以上汽车工厂工作经验，至少是机械行业
Skills and competencies
o English level：Fluent in English, meeting/ daily communication with English英语水平：英语流利，会议以及日常交流可以使用英语
o Familiar with IATF and Formel Q、APQP/PPAP/SPC/MSA/8D/Control plan/FMEA熟悉IATF 、Formel Q、APQP、PPAP、SPC、MSA、8D、行动计划、FMEA
o Ability to read 2D Drawing and other engineering designs会读2D图纸和其他工程设计图纸
o Experience in CWS would be a plus;优先考虑有腰托经验的人
o Ability to develop partnerships.有能力发展团队关系
o Comply fully with the Code of Ethics and Code of Management of Faurecia充分遵守佛吉亚《道德规范》和《管理规范》
Leadership:
○ Manages complexity管理复杂性
○ Drives results结果导向
o Collaborates with Others沟通协调能力