Job Description: -Conduct on-site service for Coperion components (extruder, screen pack changer, hydraulic system, feeding system), this comprises maintenance, installation, start-up, commissioning, trouble-shooting and training 对公司部件(挤出机,筛包更换器,液压系统,进料系统)进行现场服务,包括维护,安装,启动,调试,故障排除和培训 -Supervision and performing of electrical installation according to the low voltage electrical drawings and instruments loop diagrams. 根据低压电气图纸和仪表回路图,监督和执行电气安装。 -Function and safety loop check according to the function diagram description. 根据功能图说明检查功能和安全回路。 -Extruder systems start up with close co-operation and reporting to project manager. 与项目经理密切合作并向项目经理汇报挤出机系统的启动。 -24 hrs hotline support. 24小时热线支持。 -Basic mechanical repair work and alignment of drives 基本的机械维修和传动装置的校准工作 -Participate in the Global Large Projects by assistance to German site manager and co-ordination of daily performances with contractors 协助德国现场经理参与全球大型项目,并与承包商协调日常工作 Job Requirement: -Bachelor Degree majoring in electricity or instrument 电气或仪表类专业本科学历 -At least 5 years experience in installation and maintenance of production machines 5年以上生产设备安装和维护经验 -Willingness to travel with up to 60% of the working time on yearly. 接受每年出差60%以上的工作时间 -Having a good experience for programming with STL language in Siemens 300 & 400 PLC system, Be familiar with Siemens S7 400 redundant system. 熟练使用STL语言进行西门子300和400 PLC系统编程,熟悉西门子s7400冗余系统。 -Have good experience for programming with CFC, SFC in Siemens PCS 7 system 在Siemens pcs7系统中有良好的CFC, SFC编程经验 -Be familiar with Siemens touch screen and WinCC 6 including software and hardware. 熟悉西门子触摸屏和WinCC 6的软件和硬件。 -Have good experience to do commissioning and trouble shooting for the frequency converters, such as ABB ACS 800, Siemens G120, G150. 对ABB ACS 800,西门子G120, G150等变频器有良好的调试和故障排除经验。 -Knowing normal industrial instruments well, such as pressure sensor, PTC, thermocouple, flow meter, level switch as well as load cell. 熟悉常用工业仪表,如压力传感器、PTC、热电偶、流量计、液位开关、测压传感器等。 -Can write and modify the PCS7 and S7 program according to the logic diagrams. 能根据逻辑图编写和修改PCS7和S7程序。 -Having certain knowledge for extruder system and understanding of PI&D drawings. 对挤出机系统有一定的了解,了解PI&D图纸。 -Can use the Office software (MS Word, Excel) 会使用Office办公软件(MS Word, Excel) -Good understanding of technical drawings and the contained information. 熟练理解技术图纸及相关信息。 -Team player with hands on mentality. 具备动手和团队合作精神