Principal accountabilities/Main tasks:
主要职责/主要任务：
1.Carry out daily, weekly, monthly and yearly maintenance with the related maintenance staff. 与相关维修人员一起进行每日、每周、每月、每年的维修工作。
2.Analyze the readings and figures which are taken by the workshop staff and set corrective actions (failure analyzes, action plan) 分析车间员工提交的数据，发现问题并及时制定纠正措施 (故障分析RCA，行动计划) 。
3.Cooperated with the production section to combine product and maintenance related shut downs. Support and coordinate with other disciplines regarding Mechanical Equipment issues.与生产部门合作，对于机械设备问题进行支持和协助。
4.Ensure with maintenance planning the spare part availability to avoid unforeseen shut downs due to lake of spare parts. 通过维护计划确保备件的可用性，以避免由于备件不足导致不可预见的停机。
5.Set up tools to measure the equipment conditions (check list, lubrication schedule and diagnostic). Complete Basic Mechanical Data Sheets 设置测量设备状况的工具 (检查清单、润滑计划和诊断) ，完善设备数据清单。
6.Organize personnel training to improve the skills, confidence and responsibility of workshop staff.组织人员培训，提高车间员工的技能、信心和责任感。
7.Coordinate, control Mechanical Equipment related Cost Estimate, Check of Vendor Drawings, Follow up manufacturing progress of the equipment suppliers.协调，控制机械设备相关的成本预算，检查供应商图纸，跟踪设备供应商的进度。
8.Comply with the safety production responsibility system and 5S policy and regulations, responsible for the quality, tools, cleaning and good cleaning of the workshop.遵守安全生产责任制及5S相关政策及规定，负责部门车间的工作质量及工具和车间的清洁。
9.Completing other work arranged by leader. 完成领导交代的其他工作。

Job requirements/任职要求：
1.At least more than 5 years total work experiences of Mechanical discipline. 至少5年以上机械专业工作经验。
2.Proficient command of spoken and written for both English and Chinese (Mandarin) mandatory. 熟练掌握英语和汉语(普通话)的口语和书写能力。
3.Skilled in mechanical engineering mandatory, shall have a deep knowledge about fabricated equipment; shall have deep knowledge about rotating equipment (compressors, pumps, etc.) and static equipment (e.g. Tanks, pressure vessels, etc.); shall have a deep knowledge about material and design codes (GB, HG, SH, ASTM, ASME) 熟练掌握机械工程技术，对制造设备有较深的了解; 对动设备 (压缩机、泵等) 和静设备 (储罐、压力容器等) 有深入了解; 对材料和设计规范 (GB, HG, SH, ASTM, ASME) 有深入的了解。
4.Skilled in planning and scheduling will be an advantage具备计划和调度能力者优先。
5.Skilled in relevant software /tools like MS Project, CAD will be an advantage熟练使用MS Project、CAD等相关软件/工具者优先。