Candidate shall have 3-5 years experience in Design and Application engineering of DCS for nuclear power plant, should have hands on experience in following areas. 应聘者需要3~5年的核电厂DCS 的设计及应用经验,具体需要下述方面的能力:
? Preparation of SAMA / Functional logic diagrams using VISIO/Auto Cad. 用Visio 或 Auto Cad制图工具软件画SAMA图及逻辑框图 ? Functional Design, Development and testing of control logic on DCS platform. DCS experience is the necessary 运用DCS 平台软件进行控制逻辑功能的设计,完善及测试工作,必须具有DCS的工 作经历 ? Controller and IO allocation based on functional segmentation guidelines and Control panel cabinet engineering. 根据控制功能要求在控制机柜内进行DCS控制器及IO 信号的合理分配设计 ? Developing /updating of project related documents based on design updates. 对项目设计中涉及的更改,需要及时更新相关的项目设计文档 ? Preparation of Control System Requirements and Test procedures. 准备系统需求文档及相关的测试要求步骤 ? Participate in technical meeting with Project lead to understand Requirement/scope of work/schedule and Quality requirements. 与项目负责人一起参与技术讨论会并了解项目的需求,需要执行的范围,项目计划 及质量的要求 ? Creation of configuration documentation for third party interfaces using MODBUS/PROFIBUS protocols. 基于Modbus/Profibus 协议要求为通讯的第三方编写通讯配置文档 ? Should be familiar with Field Devices such as Transmitter, Control Valves, MCC fed Motors/Heater, HT switchgear and their interfaces with DCS. 熟悉现场设备如变送器,控制阀,马达和加热器的驱动柜, 开关设备及它们与 DCS的接口 ? Configuration and Application programming of Performance Calculation Module /package as part of DCS systems used for Fossil based or Nuclear Power Plant. 能对用于燃煤机组和核电机组的设备在DCS控制平台上进行组态和配置 ? Familiarity with various modules of the Performance Calculation package like Unit heat rate, Turbine Heat Rate, Turbo generator Heat balance, Boiler/Economizer/feed water Performance Module, Fan /large pump performance module and Cooling Tower Module etc. will be preferred 熟悉或了解各种性能计算的模型如 加热器,汽机,涡轮发电机,锅炉,给水,风 扇,大型泵和冷却塔的性能模型。 ? Should have exposure on Deployment of Enterprise Data Integration Software on Server, and Its interface with DCS/PLC’s using standard third party interface protocols like Modbus, GSM ,OPC. 具有在厂级数据通讯的经验,并能使用通讯协议如Modbus, GSM ,OPC来实现与DCS和PLC实现通讯 ? Exposure to development of communication interface driver for third party system will be preferred. ***具有与第三方通讯的研发经验 ? Candidates having relevant experience of 3-5 years on above area and worked on Performance calculation packages of reputed DCS vendors will be preferred. 3~5年的工作经验中***由上述提到的相关工作经验 ,并曾使用过知名DCS厂家 的性能计算包 ? Design and Engineering of Emergency Shutdown systems. 设计并调试过紧急跳闸保护系统 ? Familiarity with Hazard and Risk assessment SIL analysis is a plus. ***能熟悉危险的,并能做技术风险的TUV SIL评估 ? Design and Execution ( SIF/SIS development, Preparation of Safety Requirement specification and SIL Verification) ***设计过并有工作经验在 SIF/SIS 的设计,安全需求的整理编写和SIL 论证 ? Familiar with tools like failure mode effect analysis(FMEA) and cause and effect diagrams (C&E diagrams) is a plus. ***熟悉失效模式(FMEA)计算 并熟悉失效的根源和有效的框图分析 (C&E 框 图) ? Installation and Commissioning. 具有安装调试的经验 ? Familiarity with standards like IEC 61508/61511 and concepts of Safety Instrumented System, Safety Integrity Level (SIL),Safety Instrumented Function and Safety Requirement specification 熟悉安全类的标准如IEC 61508/61511,熟悉安全仪表系统的概念 ,安全的要求 (SIL ), 安全仪表的功能 及安全相关的需求 ? Candidates shall have bachelors degree in I&C engineering , Candidates having working experience with engineering consulting firms or large EPC/OEM companies and hands on experience on Ovation (Emerson DCS) for power plant platform will be preferred. 具备仪表,控制类的本科学历 ,并在工程顾问公司或大型的 EPC /OEM 公司工作的 经历,***具有Ovation 电厂控制平台的经验