Gerneral Purpose：
61Develop and realize the electric design in E3 and software control logic required for various bending machine types.
61Develop and qualify the cost-optimized cable solution from various local suppliers for all the TCN serially produced machines.
61Implement all cable relevant engineering tasks for serial machines, like cable drawing update, BoM adjustment, schematics update etc.

Main Task: 1.According to the serial development requirements for the bending machines, develop and realize the electric design, finish the BoM change in SAP, update schematics via E3 and support the software control logic development.
根据各系列折弯机的版本迭代需求，开发对应的电气硬件设计方案，在SAP中完成所需的物料变更，使用E3完成对应的电气图纸变更，并支持开发新功能所需的机床逻辑控制软件。
2.Support the testing department to define the test and verification plan for the new feature and new electric components, define and design the testing fixture, testing equipment and testing program. Perform systematic problem analysis and improve the design when testing results deviates from requirement list
支持测试部门制定新功能以及新电气原件的测试与验证计划，定义并完成测试中所需的电气工装，仪器，测试程序，并在测试结果无法达到预期的情况下进行系统化的分析与改进。
3.Continuously follow up with quality, production, purchasing and service feedback about the design relevant and components selection relevant issues. Perform the systematic analysis and implement the improved design.
持续跟进质量，生产，采购，服务反馈的各种设计，选型的相关问题，并进行系统化的分析与改进方案的落地
4.According to the new machine type development requirement and cost down requirement, lead the local AC motor’s introduction project: from the motor type selection, qualification, to the parameter adaption for the servo drive / frequency converters and other relevant tasks.
根据新机型的开发需求以及降本需求，主导国产交流电机的相关引入项目：从电机选型，新电机的验证，直到伺服驱动/变频器参数的整定等相关工作
5.According to machine’s specific function requirement, establish and create the each cable’s technical specification
根据机床的特定的使用功能需求，创建对应电缆的技术要求
6.According to the defined technical specifications of the cables, design and update the cable drawings using the E3 SW.
根据定义好的电缆技术要求，使用E3软件来设计和更新电缆图纸
7.Other necessary work relevant with electric design, like switch cabinet design and drawing creation, PLC programming, production support, electrical components localization etc.
完成其它电气设计相关的工作，如电柜设计和E3图纸更新，PLC编程，生产支持，电气零部件的国产化等。
8.Complete other tasks assigned from the direct supervisor per business requirement.
根据业务需要，完成直属经理安排的其它工作.


1.Bachelor degree or above
本科或以上学历
2.Min 1~3 years work experience in electric R&D department of machine tool company or related. 至少1~3年在机床或相关的
制造企业中的电气研发/工程部的工作经验
3.Experience at product's BOM structure, design improvement process and R&D project process.有产品物料清单结构，研发改进流程及研发项目流程经验。
4.Be familiar with E3 (or other electrical diagram SW) and Microsoft office ( ppt/word/excel..) software. 熟悉E3(或其他类似电路图纸创建软件)和 Microsoft office ( ppt/word/excel..)软件
5.Experience with PLC programming in machine tool control.有机床控制相关的PLC编程经验
6.Have knowledge and experience about the basic working principles about frequency converter, synchronous motor and asynchronous motor, the calculation methodology for motor’s and frequency converter’s type selection. Experienced in frequency converter and motor’s matching and application.
了解变频器，同步异步电机的基本原理，具有变频器和电机选型计算方法的相关知识。有变频器和电机的匹配和应用经验
7.Have knowledge and know-how with motor control theory and application experience with servo drive parameterization.
具有控制理论的相关知识，并有伺服系统参数整定的相关经验.
8.English is capable in daily working environment in including listening, speaking, reading and writing. 英语可以成功运用在日常的工作环境下（包含听说读写方面）.
9.Strong sense of high integrity, reliability, responsibility and customer orientation 正直可靠, 具备高度的责任心和客户导向意识.
10.Ability to handle issue independently, open-minded and with a team spirit.具备独立应对问题的能力, 思维开放,富有团队合作意识.
11.Ability to continuously learn.具备持续学习的能力
12.Strong anti-pressure ability and strong sense of self-motivation and goal-driven抗压能力强，具有强大的自我激励和目标驱动意识.
13.Observe the regulations of TCN including but not limited on the Employee’s Handbook and Code of Conduct of TRUMPF China.
愿意遵守通快中国的所有规章制度包括但不限于员工手册以及行为准则.