1、 Responsible for all plant mechanical equipment repair. 负责工厂内所有机械设备的维修工作。 2、Responsible for utility inspection, make sure continue running smoothly. 负责设备检测,保障持续稳定的运转。 3、Project supporting and give enough guidance. 支持厂内项目并提供相关专业的指导。 4、 Implement the PM/PDM maintenance schedule/plan according to JM requirements. 根据JM的要求,完成计划性的检维修。 5、 Work together with Electrical/Instrument technician to increase the equipment reliability and make sure all equipment works smoothly. 与机电团队协作,提高设备的可靠性保证设备平稳运行。 6、Daily production equipment site inspection and maintenance. Including the pumps, fans, rotary heater, and reaction tanks and so on. 负责日常生产设备的巡检和维修, 包括泵,风机,换热器,反应釜等。 7、 Utility system equipment running and maintenance, including air compressors, Chillier, cold/hot water system and D/I water system. 负责公用工程的运行和维修,譬如空压机,冷冻机,脱盐水,软水等制水设备。
QUALIFICATIONS任职要求 1、Normally College or above degree in mechanical Engineering. Open education requirement to Technical secondary school or technical school to 10+ year work experience background in related mechanical maintenance industry. 大专以上学历。10年以上相关行业维修经验者可放宽学历要求至中专/技术学校。 2、At least 3 years’ experience working in the chemical plant. Very familiar with the chemical equipment, such as the pump, fans, air compressor, reaction tank and so on. 3年以上的化工设备维修经验。熟练维修泵、风机、压缩机、应釜等化工设备的故障。 3、 Have certain experience in maintenance and fault maintenance of public works circulating water, chilled water, air compressor, HVAC, etc. 具备一定的公用工程循环水、冷冻水、空压机、暖通等维保、故障检修经验。 4、Good Hands-on analyst and trouble shooting ability and could solve the equipment failures alone. 良好的动手操作、分析、解决问题的能力。能够独立解决设备失效问题。 5、Certificated Welder and metal cutting experience is preferred. 具有焊工证及金属切割经验者优先。