？ Develop, qualifies and approves supplier vendors base, by supporting supplier qualification process according to Parker and Division guidelines;
根据物料种类开发、认证和批准供应商，支持供应商资格认证流程。
？ Assesses supplier’s quality performance (or cost-of-quality) using statistical and analytical methods; manage and coordinate supplier Parts Per Million (S-RPPM), supplier problem solving on time, cost recovery and supplier warranty indicators;
使用统计和分析方法评估供应商的质量绩效（或质量成本）；管理和协调供应商PPM表现、供应商问题的及时解决、成本回收和供应商返修指标的达成；
？ Control the material quality in process to ensure the internal and external customer are not affected by poor material quality
控制供应商生产过程中的物料质量，确保内部和外部客户不受材料质量差的影响；
？ Make sure nonconforming material is detected and issue/follow up the nonconforming material review report
确保检测到不合格物料并发布/跟进不合格材料审查报告；
？ Lead and implements programs to improve supplier performance. Work with the supplier directly by driving supplier continuous improvement and key lean manufacturing/production principles and techniques to critical products & key characteristics;
领导和实施提高供应商绩效的计划，通过推动供应商对关键产品和关键特性的持续改进和关键的精益制造/生产原则和技术直接与供应商合作；
？ Verify supplier compliance via suitable audit, follow-up visit and process assessments. Performs on-site audits of their quality system as related to documented procedures, work instructions, ISO 9001 Standard, etc. ;
通过供应商审计、跟踪访问和过程评估来验证供应商的合规性，对其质量体系进行现场审核，涉及文件化程序、工作指导、ISO 9001 标准等；
？ Track supplier Concern & Corrective Action Report (CCAR) plan, completion, counter-verification and effects;
跟踪供应商关注和纠正措施报告 (CCAR) 计划、完成情况、反验证和效果；
？ Continually document lessons learned and plan corrective actions as needed;
不断记录经验教训并根据需要计划纠正措施；
？ Support the customer quality claim caused by material issues and team in the correct and timely treatment of customer complaints that are related to our supplier fault’s;
支持因物料问题引起的客户质量索赔，以及正确及时地处理与供应商质量问题相关的客户投诉；
？ Lead supplier root cause investigations and corrective actions through 8D Problem Resolution process, A3 Problem solving, 5-Why, fishbone, etc.
通过 8D、A3、5-Why、鱼刺图等工具，领导供应商进行根本原因调查和纠正措施；
？ Work with Supply Chain, Project and Engineering (Design and Manufacturing Engineers) teams to define process parameters and criteria to ensure supplier process capability is effective to meet product and process requirements
与供应链、项目和工程（设计和制造工程师）团队合作，定义流程参数和标准，以确保供应商流程能力有效满足产品和流程要求；
？ Support new product launches to ensure that supplier quality meets the required standards and established related quality systems and procedures;
支持新产品的推出，确保供应商质量符合要求的标准并建立相关的质量体系和程序；
？ Communicate efficiently throughout the shop floor and with own and customer’s management
在与生产制造环节以及与自己和客户的管理层进行有效沟通；
？ Other related tasks as assigned by supervisor or department.
主管或部门交办的其他相关工作。

Requirements:
？ Bachelor in Engineering or Mechanical Engineering.
工程或机械工程学士学位
？ Over 5 years related experience.
5年以上相关经验
？ Supplier Quality experience: Good sense on auditing practice, skills and policy.
供应商质量经验：对审计实践、技能和政策有很好的认识
？ Computer literate
计算机知识
？ High standard of ethics and honesty
高标准的道德和诚实
？ Must be willing and able to travel extensively.
必须愿意并且能够广泛地出差
？ Proven track record and strong problem-solving skills, such as 8D, 5WHY, etc.
良好的业绩记录和强大的解决问题的能力，例如 8D、5WHY 等
？ Experience in manufacturing process is a plus
有加工工艺经验者优先
？ English listen and write is necessary
英文能够听、写
？ Driver license is a necessary.
驾照必须