Responsibilities -Participate TFC and Contract Review meeting to identify potential supplier risks -Responsible to define CLD according to ASM, implement necessary audit to supplier process at different phase, such as PPAP trial run, run at rate etc. -According to defined frequency in CR to track and check supplier APQP progress and ensure supplier can meet Autoliv requirements both on component quality and on timing plan control. -Define the level of PPAP submission and content details, perform PPAP validation and assure supplier PPAP to be approved correctly. -Perform run at rate and early containment of supplier production as per ASM. -Responsible for supplier problem solving process before PPAP moves to plant. -Responsible for the management of the development process of supplier projects of owned segement. -Owner of the 8D and NCM process from D4 to closure (including NCM issues from all Divisions). - Supplier’s project development and approval (APQP, PPAP) o Involved in the TFC and CTS process with Purchasing, Engineering and Suppliers. o Involved in CLD definition together with Project Buyer and Engineering. o Involved in contract review with Project Purchasing. o Define the SQP tasks based on the CLD and PPAP level required. o Follow up completion of SQP tasks in terms of timing and quality for defined deliverables. o Lead supplier production trial runs and Participate in Run at Rate per CLD. o Perform audits and PFMEA go and see as applicable for new projects. o Define the Incoming inspection / DAR template and manage the IIP (AS412) at the supplier as applicable. o Owner of the PPAP approval. (Ref. AS007, AS404 and AS100) o Escalate SQP delays / deviations according to AS404 ·-Lead ZD and SD activities (Zero Defect and Supplier Development) for assigned suppliers. -Perform Yokoten within his/her division and initiate global actions with other Segment SQ when applicable following the direction of SQ-GPAD/S. -Contribute to ALV electronic supplier management procedure, Specific Master PFMEA and S-MPS creation and governance when assigned. -Execute supplier audits per AS002 and AS069. -Support other divisions in terms of supplier onsite activities when requested. - AS051 supplier rating and appropriate escalation. -Finish tasks assigned by Manager
Requirements -Bachelor degree or above in metal material, mechanical, automotive, electronica engineering. -About 8years relative work experience -Fluent in oral English -Knowledge of quality standards such as ISO 9000 , QS 9000 VDA6.1 or IATF16949 -Familiar with Quality Management tools such as APQP,FMEA,MSA,SPC,8D tools -Experience in plastic, stamping, painting, PVD process is preferred. -Knowledge of environment standard ISO14001, Occupational Safety and Health standard OHSAS 18001 -Knowledge of the electrical hardware like ESD, MSL, AEC-Q, CQI-17, IPC-A-610 preferred -Familiar with ASPICE，ISO26262，ISO2700X，TISAX，ISO/SAE21434 preferred.
