主要职责Essential responsibilities and duties:

· 全面负责量产前的质量交付Overall responsibility for the achievement of quality deliverables until the start of production.

主要任务The main missions of the role are:

确保在所有区域内分享关于项目管理系统（PMS）可交付成果、工程变更请求（ECR）、产品质量问题、经验教训、车间解决方案、对客户有潜在影响的外购件问题等的***实践。Ensure that best practises are shared within all regions about Program Management System (PMS) deliverables, Engineering Change Requests (ECRs), product quality issues, lessons learned, shop-floor solutions, Bought Part issues with potential impacts on the customer, etc…
判别有关设计验证计划和测量装置(检具)规范的问题。Arbitrate issues between global and local content about Design Validation Plan and specifications for Measurement devices(gauge..).
带领项目质量团队的功能和充当接口工作（如工厂质量经理领导他的工厂质量团队）。Lead the Program dedicated Quality team functionally and be the consolidating interface (like a Plant Quality Manager leads his plant quality team).
实现在QTS中定义的质量目标（如PPM，报废率…），反馈给供应商（通过ASQ组织），跟踪收敛计划相关指标直到GR # 4。Achieve the Quality objectives defined within the Quality Target Study (such as the PPM, scrap rate … ), cascade them to the suppliers (via ASQ organization) and follow them by the related Target Convergence Plan until GR#4 .
作为客户联络者及相关信息需求方（进行客户APQP跟踪、审计支持、8D报告直至SOP）。Be the customer quality contact and satisfy related information demands (Customer APQP tracking, Audit support, 8D communication until SOP).
按时执行PMS相关项目质量工作包（OTD）。Execute the PMS related Program Quality work packages on time (OTD).
根据KPC清单和PFMEA编辑试生产CP及量产CP，并获得工厂质量经理批准。Edit pre-production CP/production CP according to KPC list and PFMEA and obtain the approval of Plant Quality Manager.
支持和回顾产品开发/过程控制/供应商控制（DFMEA、KPC，PFMEA， QRCI）Support and review the Product development / process control/supplier control (KPC,CPK,，PFMEA,QRCI).
PQL协调OTS递交到客户端，并获取全批直到Gate4.The PQL coordinate the OTS delivery to customer and assure the Full Approval until Gate 4 .
在出现严重不符合（客户期望或安全和法规问题……）时，有权与负责的质量经理一起停止任何过程或产品交付。Apply the authority to stop any process or product delivery in case of serious non conformances (customer expectations or safety and regulations issues….) together with the responsible Quality Manager.
定期进行风险评估(防错、终检和临时质量墙)。Conduct regular risk assessments（Poka Yoke, Final Inspection and Temporary Quality Wall） .
过程稳定性：确保关键控制特性、防错、标准工作、过程能力的一致性。Process Robustness: Ensure alignment about Key Control Characteristics, Poka Yoke, Standard Work, Process Capabilities.






任职要求：
1.工程学士学位（机械、塑料工业等）；
2.至少3 年的汽车行业同岗位经验；
3.在项目质量方面至少有3 年的经验，拥有复杂的项目（高产品多样性、多个研发中心和生产基地）；
4.熟悉项目管理系统及客户开发流程；
5.团队合作精神强，沟通能力强。